TEC 2000 Fuel Injector Cleaner Fuel Injector Cleaning - Gasoline
Description
TEC 2000 Fuel Injector Cleaner is an effective product for cleaning injectors in gasoline engines. It is a multifunctional agent often used as a last resort before engine disassembly and injector regeneration. The product is very easy to use and is applied directly to the rail using flexible hoses with a cross-section of approximately 8 mm and a length of around 1.5 meters.
TEC 2000 Fuel Injector Cleaner works extremely effectively, preventing the accumulation of moisture around injectors and contaminants in the cylinders. Moreover, the product also reduces injector wear. For a single use, one 375 ml can of the cleaner is sufficient. The gasoline injector cleaner meets all required quality standards, including EN ISO 9002. The product is suitable for both industrial and home use.
When to use?
- When the engine is running improperly
- When you suspect injector contamination caused by deposits or moisture
- When the injectors are blocked or partially blocked
- When emission standards are exceeded
- When injector corrections are excessive
- When you simply want to take care of your car or motorcycle
- When the engine lacks power, vibrates, misfires, or runs loudly
- When there is heavy smoke from the exhaust
- When you experience increased fuel consumption
- When you bought a used car and don't know its history
- When you've never cleaned the injectors
- When you want to increase engine power
How the Injector Cleaner Works
TEC 2000 Fuel Injector Cleaner
Cleans injectors and maintains the proper spray pattern of the fuel.
Maximizes fuel efficiency
Significantly improves cold and hot engine starts
Significantly reduces emissions and smooths idle operation
Removes and reduces the formation of deposits in the upper part of the cylinder
Keeps the PCV and EGR valve (exhaust gas recirculation system) clean
TEC 2000 Fuel Injector Cleaner thoroughly cleans injectors and nozzles, improving fuel spray (atomization) as well as the size and shape of the injected fuel. Using the injector cleaner also enhances fuel dosing efficiency.
Regular use of TEC 2000 Fuel Injector Cleaner (at least twice a year) helps reduce or completely eliminate moisture accumulation around injectors. Furthermore, the gasoline injector cleaner ensures cleanliness in the cylinders and prevents partial blockage of injectors. Additionally, it reduces cylinder wear, prevents deposit buildup in the catalytic converter, and eliminates the unpleasant rotten egg smell caused by deposits.
The product can also be used for engines powered by a carburetor.
Below are the results of fuel flow rate tests through a set of partially blocked injectors during the cleaning cycle using TEC 2000 Fuel Injector Cleaner.
Dispenser type: ROVER 216
Minimum flow rate required: 50 ml / 16 seconds @ 2.5 bar (new part spec = 58 ml / 16 seconds @ 2.5 bar)
Injector Start After 2 minutes After 4 minutes After 15 minutes 1 35 ml 48 ml 48 ml 52 ml 2 37 ml 48 ml 48 ml 50 ml 3 45 ml 51 ml 52 ml 54 ml 4 35 ml 43 ml 45 ml 48 ml Total 152 ml 190 ml 192 ml 204 ml
How to use
TEC 2000 Fuel Injector Cleaner
The best solution is to apply the product directly to the injector rail using a universal injector cleaning device, which can be easily found on the market.
Such a device typically consists of two hoses with a cross-section of approximately 8 mm and a length of about 1.5 meters.
We recommend installing a fuel filter on the cleaning setup (between the can and the rail).
Injector cleaning ends when the product in the can is exhausted.
Note:
- If there is suspicion of a cooling system malfunction, apply the product with intervals.
- Use the gasoline injector cleaner with the engine hood open.
If the injectors in your vehicle are heavily contaminated, we recommend extending the application time (about 40 minutes) using two cans of TEC 2000 Fuel Injector Cleaner (2×375 ml).
375ml
FOR APPROXIMATELY 20 MINUTES OF OPERATION
Manual
Disconnect the fuel supply and return lines from the injector rail.
Connect the service lines (in place of the factory ones) to the universal dispensing device.
Place the ends of the service lines into the can of TEC 2000 Fuel Injector Cleaner.
Start the engine.
From this moment, the product begins to work. One can (375 ml) is sufficient for approximately 20 minutes of operation.
When the can is empty, turn off the engine.
Disconnect the service lines.
Reconnect the factory lines.
Note: After the procedure, we recommend replacing the fuel filter.