TEC 2000 Radiator FlushRadiator Cleaning Fluid
Description
TEC 2000 Radiator Flush is a multifunctional cleaning agent that has gained worldwide recognition from customers. This product thoroughly removes scale, rust, water softener residues, and antifreeze deposits.
TEC 2000 Radiator Flush is distinguished by its speed and effectiveness. It eliminates various contaminants while protecting both rubber and metal components of the radiator. It is recommended for use twice a year.
Suitable for both professional automotive workshops and home garages. Given its strong action, it is advisable to wear special protective clothing during use to minimize the risk of burns.
When to use?
- When there is a noticeable decrease in heating power
- When there is a problem with the radiator's heat dissipation
- When key valves in the cooling system become clogged
- When the thermostat gets stuck
How Radiator Flush Works
TEC 2000 Radiator Flush
Cleans the cooling system and restores the efficiency of the cooling system
Removes accumulated scale and deposits from the cooling system
Removes previously used additives from the cooling system
Protects internal components of the system from corrosion
How to Use
TEC 2000 Radiator Flush
The TEC 2000 Radiator Flush cleaning agent is very easy to use.
What should you remember when using the radiator flushing agent?
ABOVE ALL, REMEMBER THAT THE COOLANT IN THE SYSTEM IS VERY HOT AND UNDER CONSTANT PRESSURE. UNSCREWING THE FILLER CAP TOO QUICKLY CAN RESULT IN SKIN BURNS. THEREFORE, REMEMBER TO PERFORM THE ENTIRE OPERATION SLOWLY, WITH A MODERATE UNSCREWING SPEED. TO ENSURE GREATER PROTECTION, WE RECOMMEND WEARING PROTECTIVE CLOTHING, INCLUDING GLOVES AND SAFETY GOGGLES.
325ml
For 10-15 liters of coolant
Manual
Unscrew the coolant cap on the expansion tank and pour the product into the tank, then screw the cap back on.
Start the engine and warm it up until the radiator fan turns on.
Turn on the car heater to maximum temperature.
Let the engine idle for 15 minutes.
Turn off the engine, wait for it to cool down, then carefully and slowly unscrew the expansion tank cap, and drain the coolant with the additive, following safety precautions and waste storage requirements.
Fill the cooling system with demineralized water.
Let the engine idle for 5 minutes.
Drain the demineralized water, following safety and personal protection measures.
Fill the cooling system with coolant and screw the expansion tank cap back on.
Bleed the cooling system.
TEC 2000 Radiator Flush is an innovative cleaning fluid renowned for its strong and effective action. Currently considered the most powerful and precise cleaning agent for cooling systems on the market.
TEC 2000 Radiator Flush is known for its immediate effect. It quickly cleans the system from deposits, scale, and rust. The cooling system flush reaches the deepest corners, thoroughly removing scale and dirt deposits. The strong action of TEC 2000 Radiator Flush makes it excellent for removing residues from water softeners and other antifreeze agents.
Frequently Asked Questions
FAQ
- Will one radiator flush be enough to thoroughly clean the system?
Yes – for typical cars like a Ford Focus 1.6, one 325 ml can is sufficient.