TEC 2000 Diesel Injector Cleaner is a specialized product designed for thoroughly cleaning injector tips and entire injector nozzles. It is characterized by high power and effectiveness due to the presence of many strong lubricating ingredients. TEC 2000 Diesel Injector Cleaner is intended for the maintenance of diesel engine injectors.
Thanks to its innovative formula, it is excellent for removing contaminants from low-quality fuels, as well as other impurities accumulating in injector nozzles, including carbon deposits. Regular use of the product will protect injectors from fuel overflow and complete blockage, thereby avoiding costly repairs.
TEC 2000 Diesel Injector Cleaner has been tested by many independent facilities, confirming its effectiveness and emission-reducing properties. The product reduces black smoke from the exhaust. It is available in a 375 ml can. The cleaner is recommended for use in professional automotive workshops as well as in home conditions.
TEC 2000 Diesel Injector Cleaner
TEC 2000 Diesel Injector Cleaner is a multifunctional injector cleaning agent designed for diesel engines. It thoroughly cleans injectors and injector nozzles, significantly improving the atomization and spray pattern of injected fuel. The cleaner enhances fuel combustion and noticeably reduces the characteristic black smoke emitted from the exhaust system.
The cleaning properties of the product help maintain the overall efficiency of the engine for a longer period. Data from laboratories and service stations clearly indicate that regular use of TEC 2000 Diesel Injector Cleaner extends the lifespan of injectors.
Tests conducted in laboratory settings by independent certification agencies unequivocally show that using TEC 2000 Diesel Injector Cleaner immediately reduces harmful emissions by up to 60% and increases power. Regular use of the product has also been noted to decrease fuel consumption by 4% to 8%.
Is diesel injector cleaning safe? TEC 2000 Diesel Injector Cleaner contains strong lubricating ingredients and does not dry out injectors during operation, making it completely safe. Using the cleaner will unblock and clean stuck injectors while simultaneously lubricating them. The animation below shows the lubricating components of the product.
TEC 2000 Diesel Injector Cleaner
TEC 2000 Diesel Injector Cleaner is used to reduce smoke in exhaust emissions and is best applied directly to the injector rail. A universal injector cleaning machine offered by various companies on the market can be used for this purpose. The procedure takes approximately 20 minutes.
Note:
The benefits of using the product will be immediately noticeable. The engine will run smoothly, and the exhaust emissions will be visibly cleaner. To keep the injectors clean and highly efficient, it is recommended to perform the above procedures once or twice a year.
375ml
For approximately 20 minutes of operation.
Note 1: If the effect is partial or the injectors were particularly dirty, it is recommended to repeat the entire procedure. Note 2: If neither of the above methods is feasible, place the end of the vehicle's fuel pump suction line into the can of TEC 2000 Diesel Injector Cleaner, and the "return to tank" line should also be placed into the can. The engine should run until the can is almost empty. For better results in high-mileage engines, it is recommended to extend the procedure by another 20 minutes using an additional 375 ml can of TEC 2000 Diesel Injector Cleaner.
FAQ
No. The product is a blend of diesel fuel with strong cleaning and lubricating agents. It is safe to use, and you can drive immediately after cleaning the injectors.
Yes, but for the best cleaning results, it is recommended to apply the concentrated product directly to the injector rail/Common Rail.
"After cleaning, the engine stopped smoking. I hope the effect lasts as long as possible. I plan to use this product in another car as well. I highly recommend it; it can be used without fear, best when undiluted."
"Very good product. I used it in a Toyota 2.2 D-CAT. The car wouldn't start with a cold engine, only with a starter spray. After using this product mixed with a small amount of diesel fuel (about 50 ml), the car starts immediately. I also added a bit of TEC 2000, which binds water, so the car ran for about 60 minutes until everything was burned off, including the mixed products and about 200 ml of diesel fuel. I don't know for how long, but for me, the effect is great, even though I never believed in such products before."
"It unclogged a sticking injector. The car almost always ran on three cylinders for a few good seconds on a cold engine. After using the product, the issue disappeared, and the engine ran smoothly."
"The product works very well on the system. The car starts immediately. Applied after an oil change and a green flush, it gives a great effect. I was always cautious about such products, but now that I've experienced it, I can't imagine not using them. - Marek Wrzos, Katowice."
"The product was bought to reduce emissions and eliminate smoke from the exhaust. Its small volume helped get rid of the smell from the exhaust pipe, but how can I check if there are fewer emissions? My mechanic recommended it, but I want visible results immediately."
for products
Every car owner is bound to face various types of mechanical issues over time. Some of these problems are minor annoyances, while others can be major frustrations. One of the most exasperating issues is difficulty starting a cold engine. This common probl...
Injectors, regardless of the type of fuel a vehicle is designed to use, play a crucial role in the fuel system. ...